Details of hot melt marking paint hot melt marking paint [Introduction] hot melt road marking paint from petroleum resin, EVA, PE wax, fillers and other materials, in powder form at room temperature, heating to melt kettle 180-200 ° C, while stirring was incubated for 3-5 minutes after the flow shape, is applied to the surface to form a strong coating film. A linear full, wear resistance and other characteristics, the construction of reflective beads cast it at night with a good reflective effect, it is widely used in highways and urban roads. Depending on the environment, customer requirements are different, the Guangzhou Land Rover transportation will be provided for you to choose different types of specifications. [Hot melt marking paint Parameter Product Name: hot melt marking paint Brand: Brother signpost (Red Star brand) Model Model: LH-BXTL-RR01 Material Material: petroleum resin, EVA, PE wax, fillers and other specifications Size: 25KG / tire package does not account for the drying time: ≤3min Color colour: white / yellow construction temperature: 180-200 ℃ Theoretical amount: the amount of one ton coating, coating thickness 1.8mm, coating area 225 square meters, the amount of base oil 32kg, glass Beads amount 100kg; [hot melt marking paint FEATURES 1. Strong adhesion: Reasonable resin content in the base oil has been added special rubber elastomers, adhesion super. Ensure reasonable construction technology does not fall off phenomenon. 2. Anti-cracking good: hot melt marking due to temperature changes, prone to cracking phenomenon, add a sufficient amount of EVA resin coating to prevent cracking. 3. bright color: the top-coated paint, the ratio is reasonable, good weather resistance. Long-term exposure does not change color. 4. Coating rate: density, bulky, coating rate, is one of our big features. 5. good stain resistance: PE wax quality and consumption is a key point of influence stain resistance. [Use] hot melt marking paint is generally used in highways, car parks, residential and other places, for road marking construction, parking spaces crossed. Serve as a warning the driver role, thus ensuring the traffic and pedestrian safety. [Tips] 1, the construction time to ensure that working surface is clean, dry, recommended temperature above 0 ℃ construction (low construction please appropriate to improve the material temperature). 2, when the coating melts, the temperature should be controlled between 180-200 ℃, after stir melted, and incubated for 3-5 minutes before the material, in order to fully reflect the performance of hot-melt coating. 3, base oil processing to the full, until bottoms completely dry before coating line marking. 4, the completion of a new cement road construction after possible extension of three months or two times base oil processing. Or prone to marking off phenomenon. 5, after the traffic is heavy road construction, coating base oil, set quarantine measures to prevent the wheels rolling, taking the base oil, leaving dust, or prone part marking off phenomenon.